Angelica Wall Sconce: Common Problems Solved

Quick answer

Most Angelica Wall Sconce issues—flickering, dimming, or no light—are caused by loose bulbs, incompatible dimmers, or wiring connections you can safely check yourself. If the problem persists after these steps, contact a licensed electrician.

Angelica Wall Sconce Diagnosis Guide

• Symptom: Flickering or intermittent light: Likely cause: Loose bulb or poor connection in the socket. Corrective action: Turn off power, let the bulb cool, then remove and re-seat it firmly. If the issue continues, check that the bulb type matches the fixture's rating (usually found on a sticker inside the canopy). If re-seating doesn't help, try a different bulb of the same type.
• Symptom: Light is very dim or won't turn on: Likely cause: Incompatible dimmer switch or tripped circuit breaker. Corrective action: Verify the dimmer is rated for the sconce's bulb type (LED, incandescent, etc.). Reset the breaker if needed. If the sconce has a standard on/off switch, remove the dimmer entirely. If the dimmer is compatible but the light stays dim, test the sconce on a different circuit.
• Symptom: No power at all: Likely cause: Loose wiring at the junction box or a blown fuse. Corrective action: Turn off power at the breaker. Remove the sconce canopy and check that wire nuts are tight and no wires are touching. Reconnect any loose connections. If wiring appears damaged, stop and call an electrician. Stop here if you see frayed wires, burn marks, or smell burning. Do not proceed.

Product facts

• Angelica Wall Sconce: Features Murano-style snake-shaped glass and a sleek silver frame. The glass is delicate—handle carefully during troubleshooting to avoid cracking or scratching the finish.