How to Install a Flux Flush Mount Light

Quick answer

Install your Flux Flush Mount Light by first turning off power at the breaker, then mounting the bracket, connecting wires, and securing the fixture. Follow these steps carefully to avoid common mistakes.

Installation steps

1. Turn off power and prepare: Switch off the circuit breaker supplying the existing light fixture. Use a voltage tester to confirm no power is present. Remove the old fixture and ceiling plate. Never skip the voltage test — even with the breaker off, wiring can be live.
2. Mount the bracket: Attach the provided mounting bracket to the ceiling electrical box using the screws that match your box. Ensure it is level and tight. A crooked bracket will make the entire fixture hang unevenly.
3. Connect the wiring: Match the fixture wires to the house wires: black (or brown) to black (hot), white to white (neutral), and green or bare copper to ground. Use wire nuts and wrap with electrical tape. Tuck wires neatly into the box. If wires are reversed, the light may work but be unsafe — double-check connections.
4. Attach the fixture: Lift the Flux Flush Mount Light and align its mounting holes with the bracket. Insert and tighten the screws. Gently guide the glass loops away from the ceiling to avoid pinching. Have a second person hold the fixture while you tighten screws to prevent dropping.
5. Install bulbs and test: Insert the recommended LED bulbs (warm white for the intended ambiance). Restore power at the breaker and switch on the light. Check for even illumination and no flickering. If the light flickers, turn off power and re-check wire connections.

Product facts

• Flux Flush mount Light: The Flux Flush Mount Light has fluid, serpentine glass loops that appear to float in mid-air. Handle the glass loops with care during installation to avoid breakage; consider having a helper support the fixture while you connect wires.